接着，就扔出了一只墨绿色的皮袋，袋口正好对准了洞顶的，并隐隐有霞光流露。哗啦啦”的一阵乱响，那石锥竟被轻易抓的粉碎了，无数的碎石掉落了下来。它身子一伏接着一挺，就再次向众修士扑来。一旁的韩立等人吃了一惊，这看起来如此难缠，竟这么轻易被生擒了。真是难以想象。吕天蒙自己也是一副惊喜交加的神色。不过，随之狂喜的情绪涌上了心头。若是能驯服了这么一头妖兽，那实力岂不要猛涨数截。想到这里，吕天蒙即使再沉稳，此次也喜上了眉梢。他迫不及待地冲那绿皮袋一招手，顿时此物在他人的注视中缓缓飞了过来。混炼胶企业排名旗上已经浮现的那股飓风。主要原材料采用或基生胶,加入二氧化硅,架桥剂,结构控制剂,偶联剂等多种材料,经过高温密炼机混炼而成。

所谓混炼胶是指将配合剂混合于块状、粒状和粉末状生胶中的未交联状态，且具有流动性的胶料。
the so-called mix refers to the complex agent mixed with massive, granular and powdered rubber in uncrosslinked state, glue with liquidity.
生胶或塑炼胶按配方与配合剂经炼胶机混炼的胶料叫做混炼胶。
rubber or plastic rubber by mixing with rubber material called agent by mixing machine mixing formula.
混炼胶是制造橡胶制品的坯料，即半成品，故混炼胶的胶态分散质量直接关系到成品的质量，同时混炼胶的黏弹性、流变性则直接影响胶料操作加工性能和后期生产的模压、挤出、压延、压出等加工工艺性

互联网是新技术的应用、商业模式和组织方式多位一体的转型，是一种全新的商业形态。在这个大互联网时代，思想的转变才是重要的。通过互联网，摆脱石材人既有的销售思维，用新的视角，去审视我们这个行业，这才是互联网带给我们的好处。在石材行业转型升级的路上，互联网能对石材行业起到的作用很多。比如在生产上，互联网可以把销售数据、库存数据和生产数据全程打通。零售端用多品种、浅库存来捕捉市场需求，用展示工具来促进销售、引流。供应链根据不同产品的畅销、平销、滞销情况进行柔性生产，连续补货，程度上保证产品生命周期内不断货，同时也没有过多的库存。这些都是可以通过互联网技术解决的。

the mix is blank for producing rubber products, namely semi-finished products, so the compound colloidal dispersion quality is directly related to the quality of the finished products, and rubber viscoelasticity, will directly affect the rheological properties of molded rubber properties, operation processing and post production extrusion, calendering and extrusion processing technology etc.
混炼硅橡胶是由或含基基团的线型高聚合物的聚有机硅氧烷(俗称生胶)为基础，配合补强填料、增量填料及赋予各种性能的添加剂配制成的基础胶料。
mixed silicone rubber is high polymer by methyl or containing vinyl group polyorganosiloxane (commonly known as rubber) as the foundation, with the foundation of rubber reinforcing filler, filler and additives to give a variety of incremental performance prepared.
主要原材料采用或基生胶,加入二氧化硅,架桥剂,结构控制剂,偶联剂等多种材料,经过高温密炼机混炼而成。
the main raw materials are made of methyl or vinyl based gum, adding silica, bridging agent, structural control agent, coupling agent and other materials, and mixed by high temperature mixer.
是一种成型与交联同时在模具中进行的混炼胶，它们适用作模压成型、传递模压成型及注射硅胶成型制备汽车用密封、垫片、o型圈、火花塞及胎垫等。电子电器用按键以及高压锅垫圈等产品。
it is a molding compound that is formed and cross-linked at the same time in mold. they are suitable for molding, transfer molding and injection molding to prepare automotive seals, gaskets, o rings, spark plugs and tire pads. keys for electronic appliances and high pressure cooker washer.
这类混炼胶系由基硅生胶、补强填料(气相法白炭黑，沉淀法白炭黑)、半补强填料(硅藻土)、增量填料(石英粉)、结构控制剂、改性添加剂以及化剂等经混炼配合而得。通过配方变化，还可分别制成通用型，耐热型及不需二段化型混炼胶。
this kind of compound is composed of methyl vinyl silicone rubber, reinforcing fillers (silica, fumed silica precipitation), semi reinforcing filler (gui zaotu), incremental filler (quartz powder), structure control agent and modified additives and curing agent by mixing with it. through the change of the formula, it can be made into general, heat-resistant, and no two section vulcanizing rubber.
挤出成型用混炼胶通常由基硅生胶，气相法白炭黑以及其他添加剂混炼胶配合而得。当配入dcbp后即可采用挤出机及热空气化工艺制成胶管、胶条及电线电缆等产品。
by mixing usually consists of methyl vinyl silicone rubber extrusion molding, fumed silica and other additives and mix with. when dcbp is added, the extruder and hot air vulcanization process can be used to produce rubber hose, adhesive strip and wire and cable.
挤出用混炼胶要求保持一定可塑度，当使用硬度过低的品级时，塑料可塑度太低，容易发黏，起泡，模口膨胀大，挤出物直径超过模口直径过多，影响挤出工艺及制品外观。反之使用过高硬度的品级，则因模口膨胀小，挤出困难。适用的硬度(邵a)为50-70。沉淀法白炭黑因含水量过高，不宜用作挤出成型用硅橡胶的补强填料，否则在热空气化中易引起制品发泡。
the extruding compound requires a certain degree of plasticity. when the grade is too low, plastic plasticity is too low, it is easy to sticky, blister, and die expansion is large. the diameter of the extruder exceeds the die diameter, which affects the extrusion process and appearance. conversely, the use of the high hardness of the grade is due to the small expansion of the mold mouth and difficult extrusion. the applicable hardness (shao a) is 50-70. the precipitated silica can not be used as a reinforcing filler of silicone rubber for extrusion molding because of its high water content, otherwise it can easily cause foaming in hot air vulcanization.

倒是那两只恶鬼傀儡。
1、技术含量一般;
1, the technical content is general;
2、价格高;
2. the price is high;
3、加工设备简单。
3. the processing equipment is simple.
4、浪费人工，模压机工作温度高、损害工人健康、不利于工人长期作业;
4, waste labor, the mould press has high working temperature, damage workers' health, and is not conducive to workers' long-term work.
5、加工的工序繁杂 (混炼加化剂、混炼调色、切片、人工称重);
5, the process of processing is complicated (mixing and adding vulcanizing agent, mixing and coloring, slicing, artificial weighing).
6、可以全自动控制，浪费率小于1%
6. it can be automatically controlled, and the waste rate is less than 1%